Sinterofen 300S sintering furnace: Furnace for Zirkonzahn Sintermetall

The compact Sinterofen 300S sintering furnace is fully glazed in the typical Zirkonzahn design and has been developed especially for Sintermetall sintering.

The high performance vacuum pump enables oxygen-free sintering without the use of shielding gas. Thanks to the very long-lasting SiC heating elements, the furnace requires low maintenance and is very robust.

The optimal temperature distribution, the shrinkage factor of Zirkonsahn Sintermetall of just 7% as well as its torsional stability allow the sintering of all milled dental restorations from single crowns, metal structures, telescopes, bars and attachments up to full arch bridges with a total lack of stresses in the metal.

Using the Sintering Tray Sintermetall XL 300S (for small structures of up to 5 elements) up to 50 Sintermetall elements can be sintered in the large sintering tube of the sintering furnace. With the especially developed Sintering Holder XL 300S (patent pending), it is possible to sinter two full arch bridges or up to six bars in one sintering process. Both sintering supports as well as the necessary Sintering Powder are included in the scope of delivery. After the eight-hour sintering process, the oven cools down automatically and controlled. The sintering process as well as the remaining sintering time can be checked at any time on the easy-to-use 109mm colour touchscreen panel. The Sinterofen 300S sintering furnace is quickly and easily updateable via USB port.